Home PRODUCTS Optocoupler Darlington Optocoupler Darlington Optocoupler ORPC-852-2 EN-V3

PRODUCTS

New Products

Darlington Optocoupler ORPC-852-2 EN-V3

ORPC-845 series optical coupler consists of four infrared emitting diodes and four optically to a photo Darlington detector.

Send Inquiry

Product Description

Optocoupler manufacturer

High speed isolation op amp optocoupler

Features

Current conversion ratio
(CTR:600%—7500% working condition I F =1mA, V CE =2V)
Insulation Voltage = 5,000Vrms.
Response Time
tr: TYP.60μs；tf: TYP. 53μs (@ VCE =2V, IC =10mA, RL =100Ω)
Safety approval
UL approved (No.E323844) VDE approved (No.40029733)
In compliance with RoHS, REACH standards
MSL Level 1

Instructions

ORPC-845 series optical coupler consists of four infrared emitting diodes and four optically to a photo Darlington detector.
Pin pitch of ORPC-845 is 2.54mm

Application Range

Telephone set,telephone exchangers
Sequence controllers
System appliances,measuring instruments
Signal transmission between circuits of different potentials and impedances

Functional Diagram

1,3,5,7 Anode 9,11,13,15 Emitter

2,4,6,8 Cathode 10,12,14,16 Collector

Absolute Maximum Ratings (Ta=25℃)

Parameter		Symbol	Rated Value	Unit
Input	Forward Current	IF	50	mA
	Peak forward current(1us pulse)	IFP	1	A
	Reverse Voltage	VR	6	V
	Consume Power	P	70	mW
Output	Collector and emitter Voltage	VCEO	80	V
	Emitter and collector Voltage	VECO	7	V
	Collector Current	IC	80	mA
	Consume Power	PC	150	mW
	Total Consume Power	Ptot	200	mW
*1 Insulation Voltage		Viso	5,000	Vrms
Working Temperature		Topr	-55 to + 110	℃
Deposit Temperature		Tstg	-55 to + 125
*2 Soldering Temperature		Tsol	260

*1. AC Test, 1 minute, humidity = 40~60%

Isolation voltage shall be measured using the following method.

Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
The isolation voltage tester with zero-cross circuit shall beused.
The waveform of applied voltage shall be a sine wave.

*2. soldering time is 10 seconds

Electrical optical characteristics at TA=25℃

Parameter		Symbol	Min	Typ.*	Max	Unit	Condition
Input	Forward Voltage	VF	---	1.2	1.4	V	IF=20mA
	Reverse Current	IR	---	---	5	μA	VR=5V
	Collector Capacitance	Ct	---	30	250	pF	V=0, f=1KHz
Output	Collector to emitter Current	ICEO	---	---	1	μA	VCE=10V, IF=0mA
	Collector and Emitter attenuation Voltage	BVCEO	80	---	---	V	IC=0.1mA , IF=0mA
	Emitter and Collector attenuation Voltage	BVECO	7	---	---	V	IE=0.1mA, IF=0mA
Transforming Characteristics	*1Current conversion ratio	CTR	600	---	7500	%	IF=1mA, VCE=2V
	Collector Current	IC	6	---	75	mA	IF=1mA, VCE=2V
	Collector and Emitter Saturation Voltage	VCE(sat)	---	0.8	1	V	IF=20mA, IC= 5mA
	Insulation Impedance	Riso	5×1010	1×1012	---	Ω	DC500V 40~60%R.H.
	Capacitance	Cf	---	0.6	1.0	pF	V=0, f=1MHz
	Transforming Frequency	fc	1	6	---	kHz	VCE=5V, IC=2mA, RL=100Ω, -3dB
	Rise time	tr	---	60	300	μs	VCE=2V, IC=2mA, RL=100Ω
	Descend Time	tf	---	53	250	μs	VCE=2V, IC=2mA, RL=100Ω

*1 Current Conversion Ratio = IC / IF × 100%

Order Information

Part Number

ORPC-845W-X-Y-Z

Note

W = Lead form option (S, M or none)

X = Lead frame option (F: Iron, C:copper)

Y = ‘V’ code for VDE safety (This options is not necessary). Z = ‘G’ code for Halogen free (This options is not necessary).

VDE Code can be selected.
Halogen Free can be selected.

Option	Description	Packing quantity
None	Standard DIP-16	24 units per tube
M	Wide lead bend (0.4 inch spacing)	24 units per tube
S	Surface mount lead form (low profile)	24 units per tube

Rank table of current transfer ratio（CTR）

Grade Sign	Min (%)	Max (%)
ORPC-845 NO mark	600	7500

Note: Working condition: IF=5mA, VCE=5V, Ta=25℃

Naming Rule

Manufacturer : ORIENT.
845 denotes Part Number.
Lead frame Code ：‘F’ means Iron，‘C’ means Copper.
Year Code ： '1' means '2021' and so on.
Week Code ： 01 means the first week, 02 means the second week and so on.
Day Code ：“A to G” means “Monday to Sunday”
VDE Code . (Optional)
HF Code ：Halogen Free. (Optional)
Anode.

Halogen Free Mark can be selected.
VDE Mark can be selected.

Package dimension

DIP Type

Packing Information
Packing type	Tube
Qty per Tube	24pcs
Small box (Inner) Dimension	52512860mm
Large box (Outer) Dimension	545290335mm
The Amount per Inner Box	1,200pcs
The Amount per Outer Box	12,000pcs

SOP Type

Packing Information
Packing type	Tube
Qty per Tube	24pcs
Small box (Inner) Dimension	52512860mm
Large box (Outer) Dimension	545290335mm
The Amount per Inner Box	1,000pcs
The Amount per Outer Box	10,000pcs

Packing Label Sample

Darlington Optocoupler ORPC-852-2 EN-V3

Note：

Material Code :Product ID.
P/N :Contents with "Order Information" in the specification.
Lot No. :Product data.
D/C :Product weeks.
Quantity :Packaging quantity.

Reliability Test

Temperature Profile Of Soldering
IR Reflow soldering (JEDEC-STD-020C compliant)

One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.

Profile item	Conditions
Preheat Temperature Min (T Smin ) Temperature Max (T Smax ) - Time (min to max) (ts)	150˚C 200˚C 90±30 sec
Soldering zone - Temperature (TL ) - Time (t L )	217˚C 60 sec
Peak Temperature	260˚C
Peak Temperature time	20 sec
Ramp-up rate	3˚C / sec max.
Ramp-down rate from peak temperature	3~6˚C / sec
Reflow times	≤3