Home PRODUCTS Optocoupler Phototransistor Optocoupler Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

PRODUCTS

New Products

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

The OR-3H4-4 series is consist of four channel device each pair contains two infrared led and a photo transistor detector.

Send Inquiry

Product Description

Domestic optocoupler

Features

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Current transfer ratio(CTR) : MIN. 20% at IF = ±1mA, VCE = 5V, Ta=25 ℃
High input-output isolation voltage.(VISO=3,750Vrms)
BVCEO = 80V(MIN)
Operating temperature:-55℃ to 125℃
ESD pass HBM 8000V/MM 2000V
Safety approval
UL approved(No.E323844) VDE approved(No.40029733)
CQC approved (No.CQC19001231256)
In compliance with RoHS, REACH standards
MSL Class Ⅰ

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Instructions

The OR-3H4 series device contains two infrared led and a photo transistor detector.They are encapsulated in a 4-pin SOP, free of halogens and Sb2O3

Application Range

Hybrid substrates that require high density mounting
Programmable controller
System apparatus,measuring instruments

Max Absolute rated Value (Normal Temperature=25℃)

Parameter		Symbol	Rated Value	Unit
Input	Forward Current	IF	50	mA
	Peak forward current(t=10us)	IFM	1	A
	Reverse Voltage	VR	6	V
	Power Dissipation	P	65	mW
	Junction Temperature	Tj	125	℃
Output	Collector and emitter Voltage	VCEO	80	V
	Emitter and collector Voltage	VECO	7	V
	Collector Current	IC	50	mA
	Power Dissipation	PC	150	mW
	Junction Temperature	Tj	125	℃
Total Power Dissipation		Ptot	200	mW
*1 Insulation Voltage		Viso	3750	Vrms
Operating Temperature		Topr	-55 to +125	℃
Storage Temperature		Tstg	-55 to +150
*2 Soldering Temperature		Tsol	260

*1. AC For 1 Minute, R.H. = 40 ~ 60%

Isolation voltage shall be measured using the following method.

Short between anode and cathode on the primary side and between collector and emitter on the secondary side.

The isolation voltage tester with zero-cross circuit shall be used.

The waveform of applied voltage shall be a sine wave.

*2.soldering time is 10 seconds.

Opto-electronic Characteristics(Normal Temperature=25℃)

Parameter		Symbol	Min	Typ.*	Max	Unit	Condition
Input	Forward Voltage	V_F	---	1.2	1.4	V	IF=±20mA
Input	Terminal Capacitance	C_t	---	60	---	pF	V=0, f=1KHz
Output	Collector Dark Current	ICEO	---	---	100	nA	VCE=20V,IF=0mA
	Collector-Emitter Breakdown Voltage	BVCEO	80	---	---	V	IC=0.1mA IF=0mA
	Emitter-Collector Breakdown Voltage	BVECO	7	---	---	V	IE=0.1mA IF=0mA
	*1 Current Transfer Ratio	CTR	20	---	400	%	IF=±1mA VCE=5V
	Collector Current	IC	0.2	---	4	mA	IF=±1mA VCE=5V
Transforming Characteristics	Collector-Emitter Saturation Voltage	VCE(sat)	---	---	0.3	V	IF=±8mA IC= 2.4mA
	Insulation Impedance	Riso	5×10¹⁰	1×10¹¹	---	Ω	DC500V 40~60%R.H.
	Floating Capacitance	C_f	---	0.8	1	pF	V=0, f=1MHz
	Response Time	tr	---	3	18	μs	VCE=10V IC=2mA RL=100Ω
	Descend Time	tf	---	4	18	μs	VCE=10V IC=2mA RL=100Ω

Current Conversion Ratio = IC / IF × 100%

Rank table of current transfer ratio CTR

MODEL NO.	CTR Rank	Min.	Max.	Condition	Unit
OR-3H4	NO mark	20	400	IF=±1mA, VCE=5V, Ta=25℃	%
	A	50	250
	B	100	400
	C	100	200
	GR	100	300	IF=±5mA, VCE=5V, Ta=25℃
	GR	100	300	IF=±0.5mA, VCE=5V, Ta=25℃

Current Conversion Ratio = IC / IF × 100%

Order Information

Part Number

OR-3H4W-X-Y-Z

Note

W = CTR Rank (A, B, C, GR or none) X = Tape and reel option (TP or TP1).

Y = ‘V’ code for VDE safety (This options is not necessary). Z = ‘G’ code for Halogen free.

* VDE Code can be selected.

Option	Description	Packing quantity
TP	Surface mount lead form (low profile) + TP tape & reel option	3000 units per reel
TP1	Surface mount lead form (low profile) + TP1 tape & reel option	3000 units per reel

Naming Rule

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Manufacturer : ORIENT.
Part Number : 3H4.
Rank Code ： CTR Rank
Year Code ： '0' means '2020' and so on.
Week Code ： 01 means the first week, 02 means the second week and so on.
VDE Code . (Optional)
HF Code ‘G’: Halogen Free.
Anode.

* VDE Code can be selected.

Outer Dimension

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Recommended Foot Print Patterns (Mount Pad) (unit：mm)

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Taping Dimensions

(1)OR-3H4-TP

(2)OR-3H4-TP1

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

type	Symbol	Dimensions: mm (in.)
bandwidth	W	12±0.3 (0.47)
pitch	P0	4±0.1 (0.15)
pitch	F	5.5±0.1 (0.217)
pitch	P2	2±0.1 (0.079)
interval	P1	8±0.1 (0.315)

Encapsulation type	TP/TP1
Quantity (pieces)	3000

package dimension

Packing Information
Packing type	Reel type
Tape Width	12mm
Qty per Reel	3,000pcs
Small box (inner) Dimension	34534545mm
Large box (Outer) Dimension	480x360x360mm
Max qty per small box	6,000pcs
Max qty per large box	60,000pcs

Packing Label Sample

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Note：

Material Code :Product ID.
P/N :Contents with "Order Information" in the specification.
Lot No. :Product data.
D/C :Product weeks.
Quantity :Packaging quantity.

Reliability Test

Temperature Profile Of Soldering

IR Reflow soldering (JEDEC-STD-020C compliant)

One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.

Profile item	Conditions
Preheat Temperature Min (T Smin ) Temperature Max (T Smax ) - Time (min to max) (ts)	150˚C 200˚C 90±30 sec
Soldering zone - Temperature (TL ) - Time (t L )	217˚C 60 sec
Peak Temperature	260˚C
Peak Temperature time	20 sec
Ramp-up rate	3˚C / sec max.
Ramp-down rate from peak temperature	3~6˚C / sec
Reflow times	≤3

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Wave soldering (JEDEC22A111 compliant)

One time soldering is recommended within the condition of temperature.

Temperature Time	260+0/-5˚C 10 sec
Preheat temperature Preheat time	25 to 140˚C 30 to 80 sec

Consume Grade Phototransistor Optocoupler OR-3H4-EN-V12

Hand soldering by soldering iron

Allow single lead soldering in every single process. One time soldering is recommended.

Temperature

380+0/-5˚C

Time

3 sec max